CX-AF1062
The CX-AF1062 is an Audio interface designed for the CX-1000 series IP communication system that features decentralized distribution configuration. By simply connecting to a network (LAN or WAN), it is possible to make audio announcements from the microphone or audio source devices connected to this unit to the intercom stations or amplifier units. By registering audio files in the unit's built-in memory, Chime broadcast and EV broadcast can be performed. It is equipped with 6 analog audio inputs and 2 analog audio outputs. You can adjust the volume for each audio input/output channel using the front panel-mounted volume knob or by software. In addition, the sound quality for each audio input/output channel can also be ad justed by software. Announcements and various functions can be started or stopped using the front panelmounted direct keys.
| Power Source | 24 V DC (operating range: 21.6 - 26.4 V DC) Removable terminal block ( 2 pins) or use of the optional AC adapter |
| Current Consumption | 340mA |
| Power Consumption | 8 W |
| Audio Input | 3 channels, -60 dB (*1)/0 dB (*1) selectable, 600 Ω, transformer-balanced 3 channels, 0 dB (*1), 10 kΩ, electronically balanced Removable terminal block (9 pins x 2) Only Input 1 is used in common with the front-mounted ∅6.3 mm phone jack. |
| Audio output | 2 channels, 0 dB (*1 ), 10 kΩ, electronically-balanced, removable terminal block (3 pins X 2) |
| Frequency Response | 200 Hz - 16 kHz |
| Signal to Noise Ratio | 60 dB or more |
| Distortion | 1 % or less |
| Volume Control | Audio input volume control x 6, Audio output volume control x 2 |
| Signal Processing | Input channel: Gain, EQ x 2, Comp, AGC, Trim, Gate ( for VOX function) Output channel: Gain, EQ x 7 |
| Network | Network I /F: 100BASE-TX Network protocol: TCP/IP, UDP, ARP, ICMP, HTTP, RTP, RTSP, IGMP, NTP, FTP, RSTP Audio packet transmission system: Unicast, Multicast Number of paging destinations: Unicast (max. 16), Multicast (max. 2999) Connector: RJ45 connector x 2 Network cable: UTP (Cat5 or greater) |
| Audio Transmission | Sampling frequency: 48 kHz, 16 kHz (controllable on the software) Audio codec: PCM, G. 722 Quantization bit depth: 16-bit Voice packet loss recovery: Silence insertion |
| Operation | Direct key x 10, Reset key x 1, Setting switch (input level setting (MIC/LI NE selectable)) x 1 |
| Indicators | LED indicators: LAN (green) x 2, POWER (green) x 1, RUN (green) x 1, STATUS (yellow, red, green) x 1, INPUT (red, green) x 6, OUTPUT (red, green) X 2 Direct keys: SELECT ( green) x 10, STATUS ( yellow, red, green) x 10 Direct keys: SELECT ( green) x 10, STATUS ( yellow, red, green) x 10 |
| Control Input | 10 channels, no-voltage make contact input, open voltage: 24 V DC, short-circuit current: 5 mA or less, removable terminal block (12 pins X 2) |
| Control Output | 4 channels, relay output, maximum contact capacity: 30 V DC/1.0 A, removable terminal block (6 pins x 2) 6 channels, open collector output, maximum contact capacity: 30 V DC/100 mA, removable terminal block (6 pins x 2) |
| Installation Method | Desktop, rack, or wall mounting ( Rack or wall mounting needs optional brackets.) |
| Operating Temperature | 0°c to +40 °c |
| Operating Humidity | 90 %RH (no condensation) |
| Finish | Panel, Case: Pre-coated steel plate, black, 30 % gloss Front cover: ABS resin, gray smoke |
| Dimensions | 420 (W) X 44.3 (H) X 284.5 (D) mm |
| Weight | 3.1 kg |
| Accessory | Removable terminal plug 2 pins) ... 1, Removable terminal plug ( 3 pins) ...2, Removable terminal plug (6 pins) ···4, Removable terminal plug (9 pins) ...2,Removable terminal plug (12 pins) ...2, Plastic foot ···4, Screw for fitting plastic foot ···4 Removable terminal plug 2 pins) ...1 |
| Option | AC adaptor: AD-246 Wall mounting bracket: YC-850 Rack mounting bracket: MB-15B |
